The MPE-V01 Multi Purpose Equipment for Timing Application consist of a mainboard in which is possible to plug up to 5 expansion cards, depending of your needs. It comes in two different version: 19'' chassis and ETSI compatible.
When hosted in the 19'' chassis it is provided with keypad, display and status LEDs for local management. Two hot replaceable PSU (AC or DC) are always presents as well as 2 GbE LAN interfaces for remote management, NTP Server and PTP IEEE 1588 v2 Grandmaster clock.
EXP-LPN: expansion module able to provide 4 isolated (80 dB) 10 MHz low noise outputs. The module include an OCXO which permits to maintain outputs active (in holdover) in case of failure of the mainboard OCXOs. Outputs have BNC connectors. Output level is 13 dBm over 50 Ohm.
EXP-10M: expansion module able to provide 4 isolated (80dB) 10 MHz outputs (no low noise). Connectors BNC, output level 13 dBm.
EXP-IB-AM: expansion module able to provide 4 isolated IRIG X AM outputs with BNC connectors.
EXP-IB-DC: expansion module able to provide 4 isolated IRIG X DC outputs with BNC connectors.
EXP-PPS: expansion module able to provide 4 isolated PPS outputs via BNC connectors. Output level TTL /5Vpp – 50 Ohm.
EXP-ETH: expansion module able to provide 2 GbE interfaces and 2 SFP optical ports for NTP/PTP/SyncE. This option can be congured as master or slave. The module can be equipped with its own OCXO.
EXP-GPS hot replaceable. When present it exclude the on board GPS module if already present on the unit. The module can be equipped with its own OCXO.
EXP-TIME expansion module providing 4 I/O (congurable as: E1, ToD, PPS).
EXP-MRI Multi reference Input module. It has 4 autosensing input (Time and/or frequency reference signals). This incoming signals shall synchronize the local oscillator of the system. This module it has change-over function too.
For additional informations, please, visit the MPE-V01 product sheet.